Wednesday, March 14, 2007
....some work accomplished. I was able to get the "battings" installed on the cockpit support frames. There not all in, due to some of the assembly steps I'm holding off on a few for now. I've been waiting on my seat. It's still not in. Doesn't seem too important, but after fabricating the pivoting seat back, I need the seat to make adjustments befoore I start to cut on the cockpit. Then it's 'glass time. Things should start moving a lil' faster here soon. I was unhappy with the "Compostion" of the rear deck. So I added a Jack Daniels Banner, with "Old Time Tennessee Whiskey". I also think I'll add some small scroll work around the picture of Jasper Newton "Jack" Daniel . I received the long awaited seat. Cut and epoxyed the backrest troughs and their bases. I also cut the backrest out. Cut the supports down to size (....I think). I also received a long awaited e-mail from a rudder manufacture in California.
Friday, March 2, 2007
...lots of work gettin' done. I am finished "mirroring" my panels. Pretty messy job, lots of saw dust. Only broke 01 panel,a 4a section today (...plus a crossmember), crappy plywood. I'll have to redo them tommorrow. Up until today, I was only able to do 2 sections a day (rough on the back). Been continuing with the "Deck" work. Alot of time involved so far. But it is looking good so far. Hopefully it will be worthwhile in the long run. I'm almost done with the "Old No. 7 Brand". I have fabricated the "Fighting Chair Gimbel" mounting system, it's aluminum plate, with stainless steel hardware. I've cut the 4" access plate hole through the cockpit floor. I worked on the Forward Cockpit Bulkhead wall. The access door is cut. The opening's reinforcing wood work was completed last night. Recessed Fish Finder box for the door is almost done. It should be completed, and installed this weekend. With any luck, by the beginning of the week, the hull assembly will begin.
Monday, February 26, 2007
"....Gone Fishin' " Well the weather broke a lil' bit. Hadn't been out in a while. Krista (my wife) has been hounding me to go fishin'. We went fishin' on the Combahee River. Didn't catch anything. I received some parts at the end of the week. Started to work on a door on the forward footwell wall, the Old No 7 and the Fighting chair gimble.
Monday, February 19, 2007
...weather over the weekend wasn't condusive to "Epoxy setting". Decided to work on the deck. So far, it has came out pretty good. The whole deck is pyrography artwork. Pyrography is nothing more then "WoodBurning". The problem is, if you make a mistake it's burnt into the wood. Anyway, like I said, the theme is a Jack Daniel's Barrel. The bow has the words "Jack Daniel's", individual oak boards and a Barrel hoop (the only part I'm not too fond of). The Aft Deck has a portrait of "Jack", Old No 7 , individual oak boards. Anyway, did the work with a $10 Walmart WoodBurner special. Ordered parts today. Suppose to warm up some. Hopefully this week will be productive.
Friday, February 16, 2007
...planning on hittin' the yak hard over the weekend. I have most of everything laid out, just waiting on a break in the weather. I have decided on a 4" quarter turn inspection hatch to access the Fighting chair gimble. I'm planning on using the new foam seat from Black Dog Kayaks, instead of the traditional SOT kayak seat arrangement. The seat is a minicell foam seat with hip and thigh pads. I have pretty much convinced myself to finish the kayak in a "Jack Daniels" Whiskey Barrel theme. Planning on wood burning the design on the deck. The "Old No 7 Brand" will be on the bucket recess cover on the rear deck. The bottom of the hull will be Black,(epoxy & wood stain); Carbon epoxy for the lower half. This should help protect the hull from scratches. The cockpit, is going to be Black Epoxy & black wood stain. Should make it look like the charcoal inside of a whiskey barrel. I'm probably going to regret that. I'm sure it's going to get hot. For the rod holders, I have steered away from the original Pursuit, adjustable trax rod holders. I think I'm just going to recess two angled rod holders in the forward deck. Then 3-4 in the converted "Mid deck" area behind the seat. The center one to be home to the RiverRock lantern. Well wish me luck, either the weather warms up, or I'm starting the yak in the house.
Thursday, February 15, 2007
...rough week. I worked on the Cockpit support system. I planned the 3 gal. Bucket recess and cover. I almost completed the wood rudder system. Although I'm not totally pleased with it, I think I'll march on and see how it works before I make a new one. With the cockpit supports cut out, I've been measuring and planning where everything needs to go. It isn't going to work like I wanted it to. The new Wadefish design has dramatically reduced the cockpit size. I have the original Wadefish design, but was offered the Wadefish 2 design. The changes incorporated in the Wadefish 2 were suggested by "HairyMick". The original Wadefish was design for him. He was looking for a fast SOT fishing Kayak, capable of taking rough Australian waters. I could revert back to the original Wadefish, but for now I'll march on. As for the deck, the weight of the strips is increasing the weight too much. Opting to keep it more simple, it is suppose to be a fishin' yak. Luckily (...or unluckily) the plans are in my head. Oh, and just because I'm trying to keep the hull weight down, doesn't mean the yak has to be plain or ordinary. Just stand by. If these guys on TV can make a "Theme" Chopper ..... Why not a "Theme" Kayak. After owning a Lounge for six yrs., being the #1 seller of a certain make, in the entire state of SC (...I even have an autographed 1/2 Gal. bottle Signed by the Master Distiller himself, "Jimmy Bedford" .) and my favorite "Adult Beverage". Well, I still have to force on, I need to be done for Mother's Day (...Cobia Season).
Subscribe to:
Posts (Atom)